Easy to assemble, install and maintain
The RAINMASTER Eco is easy to assemble. It is delivered complete with flexible hoses for mains water and pressure line, an expansion tank, stopcock and pressure gauge.
Wall mounting
The RAINMASTER Eco is designed for wall mounting.
Mains water connection
Connection to the mains water line is done via the flexible hose provided - with overflow screw joint, provided.
Pressure line connection
The pressure connection set, with expansion tank, stopcock and vent cock is connected to the equipment via a flexible hose.
Suction line connection
The suction line is connected to the rainwater tank.
Emergency overflow
The units overflow is connected to the household waste pipe via HT pipe DN50.
Sensor system
A float switch is installed in the tank (above the intake) and is connected to the RAINMASTER Eco control unit mounted indoors.
Start-up operation
The diaphragm pump (which can function dry) requires no initial filling of the pump. This makes the start-up operation very easy, as follows:
- Plug the equipment into the power socket
- Evacuate the air from the system via the vent cock
- Close the vent cock when the water coming through shows no more sign of bubbles Open the pressure shut-off valve and empty the pressure line on the house side (towards toilets/washing machine)
- Put the outer cover back on
And you are done! Now the system is ready to save water.
