Technical data
| Dimensions (H x B x T): | 398 x 353 x 200 mm |
| Weight: | 8 kg |
| Switchable power supply input: | 110-230 V AC/50-60Hz |
| Switchable power supply output: | Output: 24 V DC +/- 5% |
| Voltage input control board: | 22-28 V DC |
| Power input RM Eco 10/ RM Eco 14: | 90 W / 130 W |
| Max. operating pressure: | 3,5 bar |
| Max. Volume flow rate RM Eco 10/ RM Eco 14 | 10 l/min / 14 l/min |
| Intake level (self priming): | See intake diagram |
| Pump start-up pressure: | approx. 2,2 bar |
| Protion rating: | IP 44 |
| Noise level RM Eco 10/ RM Eco 14l: | 48 dbA / 58 dbA |
| Approved mains water primary pressure: | 2,5 - 6 bar |
| Switch float: | |
| Cable lengh x cross section: | 15 m x 8 mm |
| Protection rating: | IP 68 |
Distribution dimensions
| EU- Pallet weight / Volume: | 360 kg/ 1,9 m³ |
| Carton package (H x W x D): | 600 x 400 x 260 mm |
| Carton weight: | 12 kg |
| Volume: | 0,063 m³ |
| EU- Pallet (H x W x D) with 28 pcs..: | 2,00 x 0,8 x 1,20 m |
Design with dimensions and components
Figure with dimensions and components
| 6: Supplemental supply container | 12: Vent cock |
| 1: Diaphragm pump | 7: Position for fill level indicator |
| 2: Pressure switch | 8: Basis controller |
| 3: Intake fitting | 9: Mains water stop cock |
| 4: Switchable power supply | 10: Expansion tank |
| 5: 3/2-way ball valve | 11: Pressure shut-off valve |
Pump characteristic line RM Eco 10 and 14
Intake characteristic line
